Optiview Enterprise Series Manuale Utente Scaricare il pdf (Pagina 4)

- 3 -

II. Installation of the Device

1. Simple Block Diagram of the Digital Video Server

2. Configuring IP Settings through the Hyper-terminal connection

2.1 Connect the RJ45-to-DB9 connector to the Video Server.

The DB9 goes into the Serial port COM1 on a PC, while the RJ45 connector goes into

the RS232 port on the DVS (Digital Video Server). Com port may not always be COM1

on a PC. Please check with your local PC configuration for correct selection of COM

port.

2.2 Turn ON the Video Server, and press the Reset Switch at the front panel. Turn

OFF/ON the DVS again. Skip this step if your unit does not have a reset switch.

DB9 Connector to go to PC Serial Port

RJ45 connector to go to RS232

port of the Video Server

1 2 3 4 5 6 7 8 9 ... 34 35

Nessun commento

Optiview Enterprise Series Manuale Utente Pagina 4